Drums & IBC Totes

38 MM THREADED PUNCTURE SEAL SYSTEM FOR QUICK CONNECT DISPENSING SYSTEM

Threaded cap designed for 38mm threaded fitments and even rigid bottles. Puncture Seal (PS) System is a patented 1/4 inch flow system that features a low cost Puncture Seal closure cap and a specially designed quick connect coupler that...

GRAVITY FEED HOSE KIT WITH ALUMINUM NOZZLE

This dispensing hose kit requires no electricity or air source, and is suitable for use in gravity flow liquid dispensing applications. It includes 8 ft of wire reinforce braided PVC (polyvinyl chloride) hose with stainless steel permanent clamps, 1 inch...

BLACKMER ® ROTARY PUMP SOLVENT O-RING KIT FOR FLAMMABLES

Solvent O-Ring Kit has EPR (Ethylene Propylene Rubber) and Viton o-rings for the intake tube. The solvent O-ring is used for certain solvents, replacing the standard nitrile o-ring on the Blackmer rotary pumps for flammables. Note: Always check chemical...

BUNG ADAPTER FOR PP PUMP TUBE, FLUX ® LIQUID SAVER DRUM PUMP

This polypropylene bung adapter is used with the Flux® liquid saver drum pumps using the polypropylene pump tube. Shown F448 Standard Motor with F425P Polypropylene pump

UNION VALVE NOZZLE FOR FINISH THOMPSON PUMP

Nozzles allow for the safe dispensing of fluids and greater control when filling containers. This nozzle operates with a union valve and has a 1 inch hose barb. It is constructed of polypropylene and Viton. The union valve nozzle is used with...

AIR REGULATOR FOR GRACO® AIR POWERED OIL PUMP

This air regulator with bar Tee-handle is for President 10:1 pump. The air regulator has 1/2 inch inlet/outlet, 1/4 inch gauge ports with regulated pressure range 0-250 psi.

AIR ADAPTER FOR GOATTHROAT® PRESSURIZED HAND PUMP

Use this air adapter to convert your GoatThroat® hand pump (which is recommended for Class 1 and 2 flammable liquids) to an air pump using compressors, plant air, or bottled compressed air in the shop to deliver up to 4.5 GPM with 4 PSI. This adapter...

GRAVITY FEED HOSE KIT WITH POLYPROPYLENE NOZZLE

The dispensing hose kit includes 8 ft of wire reinforce braided PVC hose, stainless steel permanent clamps, 1 inch O.D. polypropylene nozzle with Viton o-ring, and 2 inch male NPT adapter. The PVC hose is resistant to many chemicals. Require no...

SOLVENT HOSE FOR BLACKMER ® ROTARY PUMPS FOR FLAMMABLES

The solvent hose replaces the standard hose on the Blackmer rotary pumps for flammables. Constructed with a nylon core, EPR (Ethylene Propylene Rubber) and Viton o-rings It is used for certain solvents Has a 3/4" diameter and is 8' long with a 3/4" NPT...

REPLACEMENT HANDLE FOR FM-APPROVED DRUM PUMP REPAIR KIT

This replacement handle for the FM-approved drum pump kit (SKU P55RK) is the adequate new addition you need for easy installation.

12 VOLT CORDLESS DRUM PUMP

12 Volt Cordless Drum Pump with a Long, Trouble-Free Life. The cordless portable EF Series drum pump is an ideal combination of performance and value such as not having a dynamic seal on the shaft in order to eliminate the need of any servicing...

LUTZ ® OPEN DRIP PROOF PUMP MOTOR WITH SPEED CONTROL

The Lutz Universal, open drip proof motor allows air to circulate, but prevents drops of liquid from falling into the motor. This ODP motor has speed control, and is equipped with a bipolar on/off switch with single pole thermal over current...