REPLACEMENT FILTERS - AEROVENT ™ SAFETY DRUM VENT

These replacement filters combine a built-in charcoal filter that captures VOC emissions with a plastic mesh coalescing filter that captures moisture released during drum venting as one unit/filter.  Filter is used with the Justrite ®...

ELBOW FITTINGS FOR JUSTRITE ® 2 INCH SAFETY DRUM VENTS

Cast iron elbow fittings are for mounting safety vents (SKUs 100 and 100P) in 2 inch end drum openings. Elbow fittings used with safety vents are to be used on a horizontally stored drum. Cast iron construction with 2 inch NPT (female) threads to...

ELBOW FITTINGS FOR JUSTRITE ® 3/4 INCH SAFETY DRUM VENT

The 3/4 inch elbow fitting allows the 2 inch safety vent to be used on a horizontally positioned drum and attaches to the 3/4 inch bung opening. Cast iron construction with 2 inch NPT (female) threads accepts the vent, and the 3/4 inch NPT coupling...

JUSTRITE® 2 IN SAFETY DRUM VENT - HORIZONTAL

This all stainless steel 2 inch horizontal vent is the best choice for use with chlorinated solvents and corrosive chemicals. It threads into the 2 inch NPS bung opening of drums stored horizontally. Lift the spring loaded knurled knob and turn to set...

AEROVENT ™ SAFETY DRUM VENT

Get Your Safety Venting the Right Way: Filter Out VOCs and Moisture While Venting. The Justrite ® Aerovent ™ safety vent automatically vents pressure build-up between 3 and 8 psi (30 to 55 kPa) and relieves vacuum for chug-free dispensing or...

JUSTRITE® 2 INCH SAFETY DRUM VENT - HORIZONTAL

This all brass 2 inch horizontal vent is ideal for use with petroleum based chemicals. It threads into the 2 inch NPS bung opening of drums stored horizontally. Lift the spring loaded knurled knob and turn to set it to open to vent pressure build-up...

JUSTRITE ® 2 INCH SAFETY DRUM VENT - VERTICAL - DUAL-ACTION

This high density polyethylene 2 inch vertical safety vent with plated steel flame arrestor is a good choice when storing or working with petroleum based chemicals. It automatically vents pressure build-up between 3 and 8 psi (30 to 55 kPa) and...

ADAPTOR FOR DISPOSABLE DESICCANT CARTRIDGE

This Drum Adapter provides convenient means for connecting the disposable cartridge (SKU 40450W) to a storage drum. The Drum Adapter will thread into either a 2 inch or a 3/4 inch bung. It is easy to place a vent drier system on any drum. Just install...

JUSTRITE® 2 INCH SAFETY DRUM VENTS - VERTICAL - DUAL-ACTION

This polyethylene 2 inch vertical safety vent with stainless steel flame arrestor is the ideal product if you are storing chlorinated solvents and corrosive chemicals, to prevent pressure build up or vacuum problems. It automatically vents pressure...

JUSTRITE® 2 INCH SAFETY DRUM VENT - VERTICAL - DUAL-ACTION

This all brass 2 inch vertical safety vent is a good choice when storing or working with petroleum-based chemicals. Automatically vents pressure build-up between 3 and 8 psi (30 to 55 kPa) and relieves vacuum for chug-free dispensing or draining of drums...

JUSTRITE® BRASS FILL VENT WITH 6 INCH FLAME ARRESTER

The safety fill vent is FM Approved for use with flammable liquids. It threads into a 2 inch bung opening and includes cap with a safety chain to prevent misplacement of the cap. Always replace vent cap when the fill vent is not in use. To use the fill...

DISPOSABLE DESICCANT CARTRIDGE FOR DRUMS

As liquid or product is drained out of a drum, air moves in. If the air is humid the water can condense in the drum and damage the contents. The desiccant cartridge dries the air as it enters the drum. This disposable cartridge absorbs up to .2 pounds of...