Product Description
With the MORSE® Hydra-Lift Drum Roller there is no more struggling to move vertical drums onto a horizontal rotator, just load an upright drum onto the drum turner at floor level, and power lift the drum into position for mixing. One motor powers the hydraulic pump which powers both the rotation and tilting functions. The motor on this unit is 1 HP, 3-Phase, TEFC (Totally Enclosed Fan Cooled). The motor runs on 230V and 460V depending on the control package chosen, SKUs CP456-E3-230 or CP-456-E3-460 (sold separately).
The Hands Off style mixer accepts vertical 55 gallon steel drums, then tilts the drum to horizontal and mixes at any speed desired between 5 – 20 RPM. Eight, 6 inch neoprene roller wheels, adjustable for various size drums, support the load.
After mixing is complete, drum is returned to vertical position and ready for use. It has a liquid load capacity of 1,000 lb. and a dry load capacity of 400 lb. Shifting a dry load exerts greater stress on the drum roller than the fluid motion of a liquid load. Helps minimize worker effort and injuries.
- Mixes closed, steel shipping drums 6 inch to 26 inch diameter and no higher than 40 inches
- Contents mix inside drum, no spills, leaks, or fumes
- 60Hz TEFC
- 1 HP
- 5 to 20 RPM
- Control package sold separately
Made in the USA
