Product Description
Industrial Low Temp Chiller – 2 Ton: Made for Very Cold Temperature Applications, Made for Indoors and Outdoors.
Designed by a team of world-class engineers and American built from Powerblanket, this Deep Freeze industrial air chiller, 2 ton horsepower (HP), 34 ¾" x 43 ¼" x 40", spells one thing: the industry standard for all low temp applications with portability and convenience.* This process chiller is the perfect solution to any standard process cooling system thanks to 1 ton horsepower, a colder fluid temperature range of 10°F - 45°F for cooling the fluid within the chiller, and a cooling capacity of 13,800 BTU/hr for 10°F and 27,200 BTU/hr for 45°F.
- Chiller units with non-ferrous, non sparking piping system for safety in hazardous areas
- Chiller best designed to be used in an indoor environment with a temp range of 40°F up to a max 100°F
- Hermetically sealed scroll compressor eliminates refrigerant leakage: Compressor and motor that drives it are permanently sealed in an enclosure (usually welded) on the same shaft with the motor inside the refrigeration circuit to forgo a shaft seal
- Corrosion resistant pump: Continuous duty, stainless steel; 3/4 HP centrifugal, 15 GPM @ 28 PSI, 25 GPM @ 23 PSI, 35 GPM @ 16 PSI, 45 GPM max
- Stainless steel tank with fully welded stainless steel couplers and 3/4” NPT taper inlet/outlet for leak-tight seal
- North Slope Chillers air cooled chiller voltage: 230/1/60 (standard); Other available voltages: 208-240/3/60, 480/3/60
- Reservoir Capacity: 15 gallon poly tank
Portable air chiller system has single point electrical connection into disconnect.
Product Videos
Custom Field
Volts 230/1/60 (Single Phase), 230/3/60 (Three Phase), 460/3/60
Temp. Range High 45
Temp. Range Low 10
Type Adjustable Thermostat
Height 43 1/4"
Length 34 3/4"
Width 40"
