Product Description
Made for Very Low Temperature Applications, Made for Indoors and Outdoors.
Designed by a team of world-class engineers and American built from Powerblanket, this Deep Freeze industrial air chiller, 1 ton horsepower (HP), 34 ¾” x 28 ¼" x 39", spells one thing: the industry standard for all low temp applications with portability and convenience.* This process chiller is the perfect solution to any standard process cooling system thanks to 1 ton horsepower, a colder fluid temperature range of 10°F - 45°F for cooling the fluid within the chiller, and a cooling capacity of 5,900 BTU/hr for 10°F and 11,900 BTU/hr for 45°F.
- Chiller units with non-ferrous, non sparking piping system for safety in hazardous areas
- Chiller best designed to be used in an indoor environment with a temp range of 40°F up to a max 100°F
- Hermetically sealed scroll compressor eliminates refrigerant leakage: Compressor and motor that drives it are permanently sealed in an enclosure (usually welded) on the same shaft with the motor inside the refrigeration circuit to forgo a shaft seal
- Non sparking Pump, no explosions: Continuous duty, non-ferrous; 1/3 HP fixed displacement pump, 4 GPM fixed 50 PSI max
- Stainless steel tank with fully welded stainless steel couplers and ½” NPT taper inlet/outlet for leak-tight seal
- North Slope Chillers air cooled chiller voltage: 230/1/60 (standard); Other available voltages: 208-240/3/60, 480/3/60
- Reservoir Capacity: 15 gallon poly tank
Portable air chiller system has single point electrical connection into disconnect and an environmentally acceptable R404a refrigerant.
Product Videos
Custom Field
Temp. Range High 75
Type Adjustable Thermostat
Temp. Range Low 40
Volts 230/1/60 (Single Phase), 230/3/60, 460/3/60
Width 39"
Height 28 ¼
Length 34 ¾
