Product Description
This 110 Gallon Overpack Salvage Drum, Bolt Ring, UN Rated, 16 Gauge is thick (1.5mm) in its top, body, and bottom construction to durably transport and store low to mildly hazardous solid products and materials. The 110 gallon steel salvage drum has an included liner to extend its use. Get a resilient, leak tight seal with this 110 gallon overpack salvage drum due to its 3/8 inch diameter heat, UV, and age resistant EPDM rubber gasket in the cover.
- Includes a 12 gauge bolt ring closure and 5/8" lug on the red cover with a bolt, nut
- UN Rated 1A2/Y409/S for low (Packing Group III), medium (Packing Group II), and high (Packing Group I) danger solid products; UN Rated 1A2/Y409/S for medium (Packing Group II) and low (Packing Group III) danger liquid products
- 30" I.D. x 42 3/4" H x 30 1/2" O.D.
- Unlined drum
This 110 gallon overpack salvage drum is designed, manufactured, and certified to meet UN/DOT 49 CFR 173.3 requirements.
IMPORTANT NOTE: The 'T' marking on a salvage drum indicates that it has been qualified for the overpacking of damaged, leaking or non-compliant steel, plastic or fiber drums. The same 'T' Salvage Drum may be used for damaged, leaking or non-compliant packages of either liquid or solid contents. Identified by the letter 'T' in the UN mark (eg: 1A2T/Y320/S/Year of Manufacture), it is not mandatory for use within the US, but it is required outside the US. Therefore, a domestic company that is overpacking a liquid or solid drum and shipping it outside the US, should be sure that they are using a 'T' qualified Salvage Drum.
